Rules For Tuesday Night
Novice-
Chassis: Any stamped steel 4" chassis, NO open motor box chassis. (May open up motor brace/bracket for better gear mesh)
Motor: Parma sealed Death star motor only, you may change brushes and springs.
Body: Any 4" GTP or LMP style body is allowed.
Tires: Any style front or rear tires may be used.
Gearing: Any 48 pitch gear and gear ratio is allowed
Front axle: Nothing smaller than .047 piano wire may be used. (NO pin tube hollow front axles allowed)
Rear axle: Any 1/8th inch rear axle may be used, you may use flattened axles (Dick P. style)
Tech:
Rear end clearance including gear must not be less than .062 (standard tech tool gauge clearance)
Maximum width of the car is 3.25" at all points, and at all times including wheels/tires (standard tech tool width)
Misc Rules:
-any lead wire, clips and braid may be used
-any guide flag, spacers and guide nut may be used
-may add weight for handling
-may use body clips or pins and pin tubes to secure the body to the chassis
-rear end braces may be used
-numbers and interiors are optional
IF YOU DIDN'T SEE IT...... THAN YOU CAN'T DO IT!!!
Pro-
Chassis: Any stamped steel 4" chassis, NO open motor box chassis. (may open up motor brace/bracket for better gear mesh)
Motor: Parma OPEN 16d (no seal) Death star motor only, you may blue print your motor to the best of your ability, cut your comm, advance the timing, zap magnets, must use all stock equipment with the exception of brushes and springs. In Affect After Christmas Break: Motors will be changed to FALCONS
Body: Alternating as follows: 2 week NASTRUCK, 2 weeks Outlaws, 2 weeks NASCAR in that order.
Tires: Any style front and rear tires may be used.
Gearing: Any 48 pitch gear and gear ratio is allowed.
Front axle: Nothing smaller than .047 piano wire may be used. (NO pin tube hollow front axles allowed)
Rear axle: Any 1/8th inch rear axle may be used, may use flattened axle (Dick P. Style)
Tech:
Rear end clearance including gear must not be less than .062 (standard tech tool gauge clearance)
Maximum width of the car is 3.25" at all points, and at all times including wheels/tires. (Standard tech tool width)
Misc Rules:
-any lead wire, clips and braid may be used
-any guide flag, spacers,and guide nut may be used
-may add weight for handling
-may use body clips or pins and pin tubes to secure the body to the chassis
-rear end braces may be used
-numbers and interiors are optional
IF YOU DIDN'T SEE IT...... THAN YOU CAN'T DO IT!!!
Questions about the rules can be directed to your Tech Director: Gary Clinton Jr.
New Class!!!!
FCR Class:
Starting after Christmas break we will be starting a new class on Tuesday nights formerly known as the FCR class. There will still be Novice and Pro races but in addition to that there will be this new class. Here are the rules:
$12 to race in this class plus $7 if you choose to race in Novice or Pro.
All that you have to bring is your controller.
At the beginning of the series, if you plan on racing, you also need to buy a body which will be painted the color of which lane the car will be designated to.
The cars will be oiled properly in between heats, you are NOT allowed to oil the cars AT ALL throughout the night!
Sal will provide the cars: You do not touch them, you can practice with them, and then they must return to the tech table where they will remain until the race begins.
Each car is pre determined as to which lane it will be on throughout the night, it does not move. There will be backups for that car if it is to break.
Sal will maintain the tires, braids, and motors.
Each car will have the same gear ratio and amount of weight which WILL NOT be added replaced or removed without Authorization!
We hope to make this a popular class.
New Class!!!!
FCR Class:
Starting after Christmas break we will be starting a new class on Tuesday nights formerly known as the FCR class. There will still be Novice and Pro races but in addition to that there will be this new class. Here are the rules:
$12 to race in this class plus $7 if you choose to race in Novice or Pro.
All that you have to bring is your controller.
At the beginning of the series, if you plan on racing, you also need to buy a body which will be painted the color of which lane the car will be designated to.
The cars will be oiled properly in between heats, you are NOT allowed to oil the cars AT ALL throughout the night!
Sal will provide the cars: You do not touch them, you can practice with them, and then they must return to the tech table where they will remain until the race begins.
Each car is pre determined as to which lane it will be on throughout the night, it does not move. There will be backups for that car if it is to break.
Sal will maintain the tires, braids, and motors.
Each car will have the same gear ratio and amount of weight which WILL NOT be added replaced or removed without Authorization!
We hope to make this a popular class.
